NXCAE - Tutorial to apply contact representation in a Sol103 Modal Analysis

NXCAE - Tutorial to apply contact representation in a Sol103 Modal Analysis

Hi,

In NX CAE, Solution 103 is modal analysis. The purpose of modal analysis is to find the mode (natural frequency) of the model. However, by default the contact representation is not included in Sol103. This tutorial show us how contact can be represented in sol103, by applying contact stiffness matrix.

The benefit of adding the contact stiffness in modal analysis is:
1.      To be able to perform a multi part assembly modal analysis.


Please find attached old tutorial.

Kind regards,
Tuw

    • Related Articles

    • NXCAE - Tensile Test Tutorial

      Hi, This tutorial is to perform a verification analysis to the tensile test test piece, by applying the stress strain curve from the test result. Solution used: Sol601,106

    • NXCAE - Second Deformation

      Hi, In CAE, first deformation means the displacement result obtained from the first analysis run. Second deformation means first deformation result is extracted and is re-used for subsequent analysis.  The benefit of second deformation is such as: 1. ...

    • NX CAE - Restart Analysis Using Sol601,106

      Hi, In CAE, restart analysis means that the analysis that is stopped by the solver previously, whether by error or by normal termination, is continued again to achieve certain purposes, without starting from the beginning of the analysis. Benefits of ...

    • NX Open – 5 Steps to Setup a Computational Fluid Dynamic (CFD) Analysis made Possible!

      Following the "Open by Design" philosophy, NX provides a comprehensive set of toolkits that allow you to capture and preserve domain knowledge over the life time of a product. The open automation vision centers on the ability to offer flexible ...